From new construction to renovations and remodels, residential and commercial. We apply quartz and pebble finishes and install tile and coping on pools, spas, fountains and water features. One licensed crew handles the job from start to finish.
Florida Certified Pool/Spa Contractor · CPC1461600The finish is the surface you see and feel inside the pool. Each type has a different look, feel and lifespan. We bring real samples so you can choose your color in person.
Colored quartz crystals mixed into a white cement base. Smooth and comfortable on your feet, resists stains, holds its color, and lasts longer than basic white plaster. Comes in many shades, from bright white to deep blue.
Natural river pebbles that give your pool the look of a clear riverbed. Textured underfoot and one of the toughest, longest-lasting finishes you can choose.
A family of pebble finishes, from fine mini-pebble to polished stone, for a natural look that lasts for years. Especially beautiful on spas, fountains and water features.
Product names are trademarks of their manufacturers.
A brand-new surface for pools and attached spas that are stained, rough, faded, peeling or delaminating (loose or hollow-sounding spots). Your pool looks and feels like new.
The final surface on newly built pools and spas, for homeowners and builders, scheduled around your construction timeline.
Vanishing edges, waterfalls, spillovers, fountains and bowls, finished and tiled so they look their best with water running.
New tile along the waterline and on steps and benches, in glass, porcelain or stone. Updates the whole look of your pool.
Coping is the edge around the top of your pool. We install travertine, marble, porcelain and brick coping for new pools and renovations.
Your pool is the centerpiece of your backyard. We help you choose a finish that fits your budget and style, give you one clear written price with no surprises, and treat your home with care while we work.
Commercial pools answer to the Florida Department of Health. Whether an inspection calls for a resurface, you are renovating or remodeling an older pool, or a new pool needs its finish, we deliver work that meets DOH requirements for public pools, with a licensed contractor as your single point of contact.
Most home resurfacing jobs take about 5 to 10 working days from drain to fill, depending on tile and coping work and the weather.
We inspect the surface, tile, coping and any problem spots, measure the pool and talk through what you want. You see real finish samples and get a written quote that spells out exactly what is included.
We drain the pool and protect your deck and equipment. Loose or failing surface is chipped out, the walls and floor are pressure washed, and a bonding coat is applied so the new finish grips tight and lasts.
If you are replacing tile or coping, the old pieces come out and the new ones are set level, cut clean and grouted. Doing this first lets the new finish meet crisp, finished edges.
On application day our crew mixes and trowels the entire pool in one continuous pass. Working it in a single day gives you an even color and a smooth surface with no seams.
Filling starts right after the finish is applied and runs without stopping until the pool is full. Stopping partway can leave a ring line, so we make sure the water keeps flowing.
We handle the start-up following the National Plasterers Council (NPC) procedure. We brush the whole pool twice a day to remove plaster dust, test the water daily and balance alkalinity, pH and calcium step by step. Chlorine is held off for the first 48 hours, then added in small, pre-diluted doses. No swimming until the water is balanced, and no automatic cleaners, salt system or pool shock during the 28-day curing period.
Residential and commercial projects throughout South Florida, the Florida Keys, the Treasure Coast and Southwest Florida.
Hollywood, Fort Lauderdale, Pembroke Pines, Miramar, Davie, Weston, Coral Springs, Plantation, Pompano Beach
Miami, Aventura, Miami Gardens, Hialeah, Doral, Coral Gables, Kendall, Homestead
Boca Raton, Delray Beach, Boynton Beach, Wellington, West Palm Beach, Jupiter
Key Largo, Islamorada, Marathon, Key West
Port St. Lucie, Fort Pierce, Vero Beach, Sebastian
Fort Myers, Cape Coral, Bonita Springs, Naples, Marco Island
Most residential resurfaces take about 5 to 10 working days from drain to fill, depending on tile and coping work and weather. The finish itself is applied in a single day.
Basic white plaster often starts to wear out in 7 to 12 years. Quartz finishes like Diamond Brite and Florida Gem usually last longer, and pebble finishes like River Rok and StoneScapes last the longest. Keeping your water balanced helps any finish last.
If you want a smooth feel and good value, choose quartz (Florida Gem or Diamond Brite). If you want the longest life and a natural stone look, choose pebble (StoneScapes or River Rok). We bring samples to your home so you can decide in person.
Yes, and it is the best time to do it. The pool is already empty, so you avoid draining it twice and everything is finished together.
Yes. Work is performed under Florida Certified Pool/Spa Contractor license CPC1461600, and we carry general liability insurance. Certificates are available on request for HOAs, property management companies and general contractors.
We perform the start-up following National Plasterers Council (NPC) guidelines: twice-daily brushing, daily water testing and step-by-step balancing, no chlorine for the first 48 hours, and no automatic cleaners, salt system or shock for 28 days while the finish cures. We keep you updated and tell you when the pool is ready to swim.
Tell us a little about your pool. We will call you, usually within one business day, to set up a free visit.